•  

    CALL US

    +91 7353664111

Aluminium Composite Panel

Available in different sizes, thickness and colors

Aluminium Composite Panel or ACP is a new age material that’s used for building exteriors, interior applications and signage. It is available in a wide range of colours and finishes like wood, stone, dual-tone etc. And it can be bent, folded and turned into shapes that can’t be achieved by any other material. Hence, ACP allows more design liberty, and is thus a designer’s delight.

Albond Aluminum Composite Panel (ACP) is a kind of composite material with the chemically processed aluminum surface layer and PE core. ACPs consists of many layers of aluminum materials. Both top and bottom layers are aluminum alloy plates with high purity. The middle part is an innocuous low-density PE core plate with a protective film stick on the front.

Outdoor aluminum composite panel is coated with fluorocarbon resin (PVDF) on the surface, while indoor aluminum plastic composite panel is coated with polyester.

Albond Aluminum Composite Panels (ACPs) are produced at aluminum composite panels factory under ISO 9001:2000 International Quality Management System. Applying advanced technologies, these aluminum composite panels now stand at the forefront of construction materials.

Albond ACPs are very rigid and strong despite its light weight. These panels come in a wide variety of colors, including metallic colors as well as patterns that imitate other materials, such as wood and marble.

Applications of ACPs are not limited to external building cladding. ACPs can also be used as partitions and false ceilings, and within the signage industry as an alternative to heavier, more expensive substrates.

Layers Of ACPWhy ACP?ACP GradesUse of Aludecor ACPSizesFeatures

The top and the bottom layers of ACP are of coated aluminium sheets and the core sandwiched between them is polyethylene.

  • Protection Film
  • PVDF/Polyester Resin Based Coating
  • Primer Coating (used in case of PVDF only)
  • Aluminium Coil
  • Adhesive Film (Polyolefin)
  • Polyethylene Core (LDPE)
  • Adhesive Film (Polyolefin)
  • Aluminium Coil
  • Service Coating (Anti-corrosive)

No material is as flexible as Aluminium Composite Panel, and it can give birth to designs that is either too difficult or impossible with other materials. This modern material comes with a host of practical and technical advantages over traditional and other materials. It’s lightweight. It’s delightfully flexible and easy to work with. It’s easy to install, and can be installed real fast. It’s durable, easy to maintain and cost-effective. And it offers a wider variety of colours and textures.

 

Features Applicable to ACP? Applicable to HPL? Applicable to Stone?
Chemical resistant Yes No Yes
Easy to Install Yes Yes No
UV Resistant Yes No Yes
Easily bent, folded and turned Yes No No
Recyclable Yes No Yes
Borer, termite and fungi resistant Yes No Yes

Albond ACPs come in 4mm and 3mm with the aluminium coil thicknesses varying from 0.12mm to 0.5mm. Based on this, they are divided into different grades:

  • AL45 – 4mm panel with 0.5mm aluminium coil thickness, meant for exterior applications
  • AL43 – 4mm panel with 0.25mm aluminium coil thickness, meant for exterior applications
  • AL33 – 3mm panel with 0.25mm aluminum coil thickness, meant for both exterior and interior applications
  • AL33D – 3mm panel with 0.3mm aluminium coil thickness, the aluminium alloy being AA3105, is meant for exterior applications, especially fascia and signage
  • AL32 – 3mm panel with 0.20mm aluminium coil thickness, meant for interior applications
  • AL312 – 3mm panel with 0.12mm alumunium coil thickness, meant for interior applications

All types of Albond ACP series, be it regular or special, are available within these grades.

Use of Albond ACP
  • Exterior – façade, canopy, overhang, soffit and more
  • Interior – wall covering, false ceiling, cupboards, wardrobes, modular kitchens, table tops, column covers and more
  • Corporate Identity Design – Signage, kiosks, totems, POPs, fascia etc.

Besides regular series that comprises solid and metallic colours, Aludecor has an ever growing palette of special series comprising Sand, Rustic, Cortina, Timber et al.

SIZES:

  • 3mm x 0.15mm PE 4’ x 8’
  • 3mm x 0.15mm PE 4’ x 16’
  • 4mm x 0.21mm PVDF 4’ x 8’
  • 4mm x 0.21mm PVDF 4’ x 16’

COLORS:
Silver, Gold, Red, Yellow, Black, White, Blue, Green, Grey, Coffee, Copper, Glossy Red, and many more!

FEATURES:

  • Excellent torsion strength
  • Easy processing and installation
  • Excellent impact resistance
  • Excellent Weather Resistance
  • Even coating and various colors
  • Easy to maintain
  • Fire retardant
  • Non-toxic